Archive for November, 2015

Beer Tote

| November 23, 2015 | 0 Comments

My Version of the beer tote.

Beer Tote

Here is the beer / Pop (Soda Pop) depending on from what part of the country you are from :), I made as Christmas gifts.

I found the instructions on Pinterest. The bottle opener (“Open Here” Cast Iron Wall Mount Bottle Opener Vintage Look Replica) are from Amazon. Clicking on the link will take you directly to the set of 8 that I purchased. There are many options you can choose from. I chose the Cast Iron Wall Bottle opener because it was a better fit for the rustic look I was going for.

Supplies:

1 – 1 x 6 x 8 (actual 3/4 X 5 1/2″) Pine or whatever you would like to use.
1 – 1/4 pine plywood – Home stores sell 36″ x 36″ Used to cute 1″ x 10″ pieces.
4 – 2 inch screws
Wood Glue
2″ Brad nails – Used to attach the slats to the side.
1/2″ dowel rod for the handle.
steel wool
white vinegar
Tools:

Compound Miter saw
Drill
Router (Optional) – Used my Ridgid trim router to round over all the edges. You can easily use sand paper to do this as well.
Hammer
Drill bits – 1/2″ , #8 drill bit with counter sink.
The build process is pretty easy. I would suggest if you are going to make a few of them, I would make a template for the ends as well as a jig for cutting plywood for the separators.

The finish is nothing more than Steel Wool and White Vinegar. I took about 1/4 of piece of #0000 steel wool and about half cup of white vinegar and put it in a mason jar the let it sit for a day or so. Once I was happy with the color, I took the steel wool out and then poured it into another mason jar. I did use a paint filter to filter out some of the finer pieces of steel wool. Then used a foam brush to apply it.

Next Steps for Custom Wood Workshop

| November 20, 2015 | 0 Comments

What is happening with Custom Wood Workshop?

The closing was probably not the correct word I should have used.  The site still remains up and I am planning on adding back my pictures of completed projects.

With that said, I do have another project I am working on. Building an entertainment center for my basement.  While building the entertainment center, I had thought that has led me to keeping this up and running.

The thought or should say issue is this.  I had purchased a plan for the entertainment center and after spending several hours reviewing it, checking it for errors, etc .. I realized it was horrible and not worth the money I spent on it.

So, this gave me the idea of reviewing purchased woodworking plans and publishing them here for everyone to read so that you can you make your own judgement about purchasing plans.  I have used many plans in the past that were okay and worked for what I needed, but none have compared to the latest one I purchased.

Make sure to come back as I start posting the reviews of the plans I have used in the past as well as tips for creating your own.  It really is not that hard to create your own. But sometimes you don’t have the time to.